COLOR CODEWQ/PWQ - Pearl WhiteJeep Touch-Up Paint

The Look

If you drive a Cherokee or Grand Cherokee from the late 2010s, you know this color provides a premium depth that basic whites simply cannot reach. It replaces the flat, industrial look of a standard fleet vehicle with a creamy, shimmering finish that reacts to the shifting sun. Since your Jeep has likely spent the last few years facing highway debris and gravel paths, these small chips can break that high-end illusion. This color is the hallmark of the luxury trims, and restoring that glow requires a little more attention than a standard solid paint.

Technical Details

This is a pearl finish, which means it contains tiny mica particles designed to catch and reflect light. Because it relies on these particles, it is sensitive to how you apply it. If the paint is applied too heavily in one spot, you might see mottling or dark patches where the mica clusters together. The final shade is also dependent on layering; more coats will often make the white appear deeper or slightly warmer. Because it has this translucent quality, the pearl effect is great at hiding light road dust, but it requires a steady hand to ensure the repair blends into the original panel.

Best Practices

You can find your paint code on the silver VIN sticker located on your driver-side door jamb, usually listed next to the "PNT" or "Paint" heading. Before you apply Jeep Pearl White (code WQ/PWQ), you must shake the container for at least one full minute to ensure those pearl particles are fully suspended. Do not skip the preparation; always test the color on the included card first to see how the layers build up. When you are ready to work on the vehicle, find a spot in the shade and keep the container moving to avoid build-up. Allow for plenty of drying time between thin layers to build the depth slowly, ensuring the repair stays level with the factory finish.