COLOR CODE35J - Regal Blue PearlSubaru Touch-Up Paint

The Look

Subaru models from the mid-2000s are legendary workhorses, but this color gave them a necessary touch of sophistication. Whether it is on a Legacy sedan, a Forester, or an Impreza wagon, this shade avoids the boy-racer reputation of the brighter rally blues. It functions as a deep navy that looks nearly black in the garage, but it wakes up with a vibrant glow once you pull it into the sunlight. Since your car has likely been on the road for nearly two decades, the original finish has probably matured, so your repair will help restore that missing depth.

Technical Details

This is a pearl finish, which means it relies on tiny mica particles rather than standard metallic flakes. These particles create the signature color shift, but they are heavy and settle at the bottom of the container quickly. If you do not mix them thoroughly, the repair will look like a flat, dull blue that won't catch the light correctly. Pearl finishes are also prone to mottling, where the color looks blotchy if the paint is applied too heavily in one spot. Consistency is the only way to make the mica lay down flat and reflect light evenly across the panel.

Best Practices

Before you spray or dab Subaru Regal Blue Pearl (check for code 35J), you need to shake it for at least 60 seconds to suspend those mica particles. You can find your paint code on a silver plate located on the passenger side strut tower under the hood or inside the driver side door jamb. Always test the color on the included card to ensure the shade matches your weathered finish. When applying the paint, keep the container moving to ensure an even flow. Use thin layers rather than one thick coat, and allow plenty of drying time between each pass to prevent the pearl from clumping or sagging.