COLOR CODEG2/M7089 - Redfire Pearl MetallicFord Touch-Up Paint

The Look

This shade defines the peak of Ford's early 2000s design. Whether it is coating the aggressive curves of a Mustang Cobra or the massive panels of an Excursion, this color strikes a balance between a sophisticated burgundy and a bright, high-energy red. Because your car has likely been on the road for nearly two decades, you probably notice how the paint transforms depending on the light. In the shade, it looks like a deep wine, but once the sun hits those Explorer or Escape body lines, the pearl pigment wakes up and gives the finish a glowing, liquid appearance.

Technical Details

You are working with a pearl metallic finish, which means the secret is in the flakes. This is not a flat, solid color that covers everything in one go. The pearl particles are suspended in the paint to catch light, but they are heavy and love to sink to the bottom of the container. If you do not mix them thoroughly, your repair will look dark, dull, and completely lose that signature fire. Metallic paints are also prone to mottling, which looks like dark spots or stripes, usually caused by applying the paint too heavily in one spot. To avoid this, you need to build the color with light, even layers.

Best Practices

Open your driver's side door and look at the VIN sticker on the jamb; you will see your code listed next to the EXT PNT label. Before you spray or dab Ford Redfire Pearl Metallic (check for code G2/M7089), you need to shake it for at least 60 seconds to ensure the pearl and metallic flakes are fully suspended. Test the color on the included card before you touch your car to make sure the shade matches your weathered finish. When applying, keep the container moving at a steady pace and give each layer plenty of drying time. This patience prevents the metallic flakes from clumping together, ensuring your repair blends into the original finish.