COLOR CODEAQ/M6985 - Arizona Beige MetallicFord Touch-Up Paint

The Look

You likely recognize this color from the two-tone trim on every King Ranch F-Series or Eddie Bauer Expedition from the early 2000s. It defined an era of Ford trucks and SUVs, serving as the warmer, more sophisticated cousin to silver. If you own an Excursion or a Crown Victoria in this shade, you know the biggest perk is how well it hides the reality of the road. Dust and light dirt vanish against this gold-toned beige. It is the choice for drivers who want a vehicle to look respectable even between washes.

Technical Details

This is a metallic finish, not a flat solid. While that gives the paint depth in the sun, it also creates a challenge for your repair. Light metallics are prone to mottling, where the silver flakes clump together and create dark, blotchy patches. Since your vehicle has likely seen years of sun and weather, the original finish may differ from a fresh batch. You are dealing with a color that hides mistakes well, but you might struggle with a match if you apply it too heavy in one spot.

Best Practices

Before you spray or dab Ford Arizona Beige Metallic (check for code AQ/M6985), you need to shake it for 60 seconds. You will find that code on the silver sticker inside your driver's side door jamb, usually next to the "EXT PNT" label. Because those metallic flakes are heavier than the beige tint, they sink to the bottom of the container. Test the color on the included card to check the distribution of the flakes. Keep the container moving as you work to prevent the metal from pooling. Apply three thin layers rather than one thick one. Thinner layers allow the flakes to stand up and catch the light. Give it plenty of drying time between applications to ensure the finish stays level.