COLOR CODEH1Q - Twilight BlueSubaru Touch-Up Paint

The Look

Twilight Blue defines an era of Subaru utility. It is not the loud, racing blue found on performance models. Instead, this is a muted, earthy tone that shifts toward lavender or slate grey depending on the clouds. Since your Outback, Legacy, or Crosstrek has spent years on the road, you might notice the original finish has oxidized. This color is popular because it hides road dust, but that same subtlety means you need to be precise during your repair to maintain the factory depth.

Technical Details

This is a metallic finish, which means it contains tiny flakes designed to catch the light. Metallics can suffer from mottling, where the flakes clump together and create dark, uneven splotches if the paint is applied too heavily. To prevent this, focus on building the color through multiple light layers rather than one thick coat. If the paint is too wet, the metal particles sink or drift, making the repair look darker than the rest of the panel.

Best Practices

You will find your paint code on the passenger side, usually printed on a silver plate on the strut tower under the hood or on the center door pillar. Before you spray or dab Subaru Twilight Blue (check for code H1Q), you need to shake it for at least two minutes to ensure the metallic flakes are mixed. Always test the color on the included card before touching your car to see how the flakes lay down. Keep the container moving at all times to avoid pooling, and allow plenty of drying time between each thin layer.