COLOR CODEK32 - Serengeti Sand MetallicNissan Touch-Up Paint

The Look

This color defines a specific era of the Nissan lineup, appearing frequently on the Sentra, Versa, and Quest between 2007 and 2009. It is a practical, mid-tone champagne that sits somewhere between silver and gold. Owners value this shade because it is incredibly forgiving; it masks road salt, dust, and light grime better than almost any other factory finish. Since your car has likely been on the road for over fifteen years, the original finish has probably mellowed under the sun. This means the fresh paint might look slightly richer than the weathered panels, but it will still provide a much cleaner look than an exposed scratch.

Technical Details

The finish is a true metallic, packed with fine aluminum flakes that give the car its characteristic glow. These flakes are heavy and tend to settle at the bottom of the container quickly. If you do not mix them thoroughly, you will end up with a flat beige that lacks the factory shimmer. Before you spray or dab Nissan Serengeti Sand Metallic (check for code K32), you must shake the container for a full sixty seconds. If the paint is applied too thick in a single pass, the metallic flakes can bunch up and create dark, uneven streaks. Keeping your layers thin is the only way to ensure the flakes lay down flat and reflect light evenly.

Best Practices

You can find your color ID on a sticker or plate located on the driver's side door jamb or the passenger-side firewall. To ensure the shade is right for your specific car's level of aging, always test the color on the included card before touching the vehicle. Whether you are using a pen or a can, keep the container moving to prevent the paint from pooling in one spot. This movement helps the metallic particles distribute themselves naturally across the repair area. Apply several light coats rather than one heavy one, and give the area plenty of drying time between each layer to prevent the finish from becoming muddy.