COLOR CODEUCAA1 - Gray MetallicLexus Touch-Up Paint

The Look

If you own an LX470 or an RX330 from the early 2000s, you are likely looking at the rugged accent color that defined the era. This shade was often used on the bumpers and lower body cladding to give your Lexus a grounded, two-tone appearance that bridged the gap between luxury and utility. Since your vehicle has been on the road for over two decades, the original finish has probably faced plenty of sun and road salt. This means the depth of the gray might have shifted over time, so you should expect the new paint to look slightly sharper and more vibrant than the aged panels surrounding it.

Technical Details

This is a true metallic finish, which means it relies on tiny flakes to create its signature depth. Metallic paints are prone to mottling, which happens when those flakes clump together and create dark, uneven patches or stripes. This is especially noticeable on the broad, flat surfaces of a bumper. Before you spray or dab Lexus Gray Metallic (check for code UCAA1), you must ensure those flakes are evenly distributed. If the flakes are not suspended properly in the liquid, the repair will look like a flat, muddy gray instead of the crisp metallic it was meant to be.

Best Practices

You can find your paint code on the identification sticker located on the driver's side door jamb, usually listed right after the letters C/TR. To get the best results in your garage or a patch of shade, you must shake the container vigorously for at least sixty seconds to mix the metallic particles. Test the color on the included card to see how the flakes lay before you touch the car. When applying, keep the container moving to avoid heavy spots. Use thin layers and allow for plenty of drying time between them. Building the color slowly is the only way to ensure the metallic flakes settle flat and match the factory texture.