COLOR CODEOM - Dark Brown MetallicJeep Touch-Up Paint

The Look

This color is a time capsule from the rugged AMC era of the early eighties. It belongs on the trail, perfectly matching the mud and timber of the backwoods. Whether you are fixing a scratch on a CJ-7 or refreshing a classic Wagoneer, this deep earth tone captures the utilitarian spirit of the 1980 and 1981 lineup. It is a mature, dark chocolate shade that looks best when paired with the gold or tan decals common to the Scrambler and Laredo trims. Because your Jeep has likely spent four decades in the sun and rain, the original finish may have shifted slightly, but this pigment provides the heavy, honest base needed to restore that factory grit.

Technical Details

Since this is a metallic finish, the metal flakes inside the mixture behave differently than a solid color. These tiny particles are heavy and naturally want to sink to the bottom of the container. If you do not keep the container moving, you will end up with "mottling," which looks like dark, cloudy patches or tiger stripes across the panel. This happens because the flakes clump together instead of laying flat. To get a uniform look that catches the light correctly, you must use thin, even layers. Avoid heavy coats that soak the surface, as this allows the flakes to swim around and settle in clusters, ruining the depth of the brown.

Best Practices

To verify your match, look for the metal VIN tag riveted to the firewall under the hood, typically located just below the brake master cylinder. Before you spray or dab Jeep Dark Brown Metallic (check for code OM), you need to shake it for 60 seconds. This ensures the metallic particles are fully suspended in the resin. Test the color on the included card before you touch the vehicle to see how the flakes lay down. When applying, keep the container moving in steady passes and maintain a consistent spray distance. Allow plenty of drying time between your layers to prevent the paint from sagging. If you are using a pen or brush, use light dabs rather than long strokes to keep the metallic look consistent with the surrounding area.