COLOR CODE0M - Dark Brown MetallicJeep Touch-Up Paint

The Look

This is a rare, one-year-only relic from the AMC era. Because it only appeared on the 1982 lineup, seeing it on a surviving CJ-7 or Wagoneer is a treat for purists. It captures that specific early-80s transition where the flashy colors of the previous decade gave way to deep, rugged earth tones. Since your Jeep has likely spent the last forty years facing the sun and trail brush, the original finish has almost certainly oxidized. This brown was designed to look at home in the mud, but when it is fresh, it has a sophisticated depth that modern flat browns simply cannot match.

Technical Details

This is a metallic finish, which means it relies on a heavy load of fine flakes to create its shimmer. Metallic paints are notoriously picky because those flakes tend to settle at the bottom of the container the moment you stop moving. If the paint goes on too heavy in one spot, the flakes will bunch together and create dark, uneven blotches or stripes. This effect, known as mottling, ruins the uniform look of the panel. You need a consistent, even application to ensure the metal particles lay flat and catch the light correctly across the entire surface.

Best Practices

Before you spray or dab Jeep Dark Brown Metallic (check for code 0M), you need to shake it for a full minute to get those metallic flakes into the mix. On these older models, you will usually find your paint code stamped on a metal plate riveted to the firewall inside the engine compartment. Once you are ready, test the color on the included card to see how well it aligns with your aged paint. When you begin the repair, keep the container moving at all times to avoid puddles or heavy spots. Allow for plenty of drying time between each layer so the finish sets firmly without the flakes shifting.