COLOR CODEGFM - Jinx TricoatChevrolet Touch-Up Paint

The Look

If you drive a newer Trax or Blazer, you probably chose this color because you wanted to stand out in the parking lot. This is not a shy, retiring shade of red. It is a bold, high-energy crimson that uses its depth to catch the light from every angle. Since your vehicle is likely only a few years old, the factory finish still has its original pop, which makes touching up small chips much easier. Whether it is on the aggressive lines of the Blazer or the sporty profile of the Trax, this color is designed to look expensive and fast, even when you are just sitting at a red light.

Technical Details

This finish is a complex pearl-metallic tricoat, which means the depth you see comes from layers rather than just a single coat of pigment. Because it relies on metallic flakes to create that signature glow, you have to be careful about how much paint you apply. If you layer it on too thick in one spot, the metallic particles will bunch up and make the repair look darker or muddier than the rest of the panel. Before you spray or dab Chevrolet Jinx Tricoat (check for code GFM), you need to shake it for 60 seconds to ensure those heavy flakes are fully suspended in the liquid and ready to flow.

Best Practices

You can find your paint code on the silver Service Parts Identification sticker, typically located on the driver-side door jamb or inside the glove box on modern Chevrolet models. When you are ready to begin, move your car into a cool garage or a patch of shade to keep the metal from getting too hot. Test the color on the included card first to see how many layers of the midcoat you need to reach a perfect match. When applying, keep the container moving in steady passes and allow plenty of drying time between each thin layer. This patience prevents the metallic flakes from shifting and ensures your repair blends naturally into the factory finish.