COLOR CODE8J2 - Medium Blue Pearl MetallicToyota Touch-Up Paint

The Look

If you are driving a Celica or an MR2 from the nineties, you probably recognize this shade. It is a deep, rich blue that feels very much of its era-sporty without being loud. On models like the Tercel or Paseo, it adds a bit of weight and class to a smaller body. Since your Toyota has likely been on the road for a couple of decades, the original finish has seen plenty of sun and weather. This means the blue on your car might look a little different than it did on the showroom floor, so matching the depth of the original flake is your primary goal.

Technical Details

This finish is a pearl metallic, meaning it contains tiny particles that catch the light to create a sense of depth. Pearl finishes are great for hiding small surface dust, but they require patience during application. If you apply the paint too heavily in one spot, those metallic flakes will mottle. This creates dark, uneven patches that look like bruising on the panel because the flakes are standing up rather than laying flat. You want an even distribution to ensure the light hits the repair the same way it hits the factory paint.

Best Practices

Before you spray or dab Toyota Medium Blue Pearl Metallic (check for code 8J2), you need to shake it for 60 seconds. This mixing is vital because the heavy pearl particles sink to the bottom of the container. You can find your paint code on the driver's side door jamb sticker, usually listed right after the letters "C/TR." Always work in your garage or the shade to keep the metal surface cool to the touch. Test the color on the included card first to get a feel for the flow. When you move to the car, keep the container moving and use light, overlapping layers. Give each layer enough drying time before adding the next to ensure the color builds up correctly without sagging.