COLOR CODEC9X/2T - Jet Black PearlPorsche Touch-Up Paint

The Look

If you drive a Cayenne, 911, Boxster, or Cayman, you already know that this isn't just another standard black. Since your car has likely been on the road for a few years, you have probably noticed how this finish shifts in the light. It acts as the sophisticated, deeper alternative to the basic flat black Porsche offers. In the shade of your garage, it looks like a deep, solid ink. Once you pull into the sun, the hidden character reveals itself. It mimics the look of a clear night sky, adding a layer of depth that highlights the curves of a 911 or the muscular lines of a Cayenne without being loud or flashy.

Technical Details

This is a metallic finish, though it is often categorized as a pearl due to the fine, shimmer-like quality of the flakes. The biggest challenge with this paint is that the black pigment is very dominant, while the metallic particles are heavy and like to sink. Before you spray or dab Porsche Jet Black Pearl (check for code C9X/2T), you must shake the container for at least a full minute. If those flakes aren't fully suspended, the repair will look like a flat, mismatched black smudge. Because it is a dark metallic, it is also prone to mottling-those little dark stripes or bunches of color-if the paint is applied too thick or too thin in one spot.

Best Practices

Start by hunting down your code. Porsche labels are notorious for hiding, but you can usually find yours on a white paper sticker under the front hood, inside the door jamb, or in the spare tire area. In some cases, a duplicate sticker is tucked into the first page of your maintenance manual. When you are ready to work, keep the container moving with a steady, rhythmic flow to ensure the flakes spread out evenly. Avoid the temptation to fix a scratch in one heavy layer; instead, build up the color gradually. Test the color on the included card before you touch the car to make sure your shaking technique has properly mixed the metallics. Give the paint plenty of drying time between coats so the finish stays level and smooth.