COLOR CODE62U/WA687F - Red Hot RedPontiac Touch-Up Paint

The Look

Red Hot Red is the loud, unapologetic shade that defined the final decade of Pontiac performance. Whether it was called Torrid Red on your GTO or Liquid Red on your G8, this color was designed to highlight the aggressive lines of these Holden-derived muscle cars. Because your car has likely spent over a decade on the road, the finish may have lost some of its original punch. This vibrant red is famous for its depth, but it requires a clean, well-prepped surface to truly pop again in the shade of your garage.

Technical Details

This is a solid finish, which means there is no metallic flake or pearl to hide behind. The advantage is a pure, deep color that is easier to match than a complex metallic. However, solid reds are notorious for being somewhat transparent. If you don't use a uniform primer, the damage underneath will show through your new layers. Furthermore, red pigments are heavy and tend to settle at the bottom of the container. If you don't mix the paint thoroughly, the color will look thin and may not provide the coverage you need to hide the repair.

Best Practices

You can find your paint identification sticker located inside the glovebox or near the spare tire well in the trunk. Before you spray or dab Pontiac Red Hot Red (check for code 62U/WA687F), you must shake the container vigorously for at least two minutes to wake up those heavy pigments. Test the color on the included card to see how well it matches the current state of your car. When you start the repair, keep the container moving to prevent the paint from pooling and allow plenty of drying time between each thin layer. Building the color slowly is the only way to achieve that deep, factory-fresh look.