Mercury Tracer Touch Up Paint

Mercury Tracer Touch Up Paint (64 OEM Colors)

Search for your Tracer's color

Report a Missing Color Help Me Find My Color
Where to find Mercury color code

Find Your Mercury Tracer Paint Code

Mercury places the paint color code on the drivers door jamb. On the color plate, the code appears near EX PT (Exterior Paint), typically above or below; sometimes the actual color is embossed on the plate and not where expected. The typical format is WT/M6640, but the M6640 part is rarely used and often only WT appears. WT corresponds to Performance White Clearcoat. Pre 1970 Mercurys can be problematic due to same-name, different-color issues and different codes.

Find My Mercury Paint Code

Mercury Tracer Paint Info

The Color Breakdown

Mercury didn't just build a reliable commuter with the Tracer; they built a rolling prism. With 64 recorded colors, they really leaned into that classic 90s palette. We're talking about everything from the sophisticated Amazon Green Metallic to the delightfully specific Boysenberry Pearl and the sunshine-ready Citrus Gold Metallic. Whether yours is a subtle Silver Frost or a bold Toreador Red, Mercury made sure your Tracer stood out in the grocery store parking lot.

What to Watch For

Now, the 90s were a bit of a "experimental" era for paint chemistry. If you look at your roof or hood and see what looks like a bad sunburn-flaky, white, or peeling-that's just the clear coat saying it's had enough of the sun. You'll also want to check the door handles and the edges of the trunk, as these spots tend to show wear first.

To get your exact match, open the driver's side door and look at the door jamb (the B-pillar). You're looking for a sticker with a barcode; right around there, you'll see a two-character code next to the "EXT PNT" label. That little code is the secret handshake you need to get the right bottle of touch-up.

Driveway Repair Tip

Since so many Tracer colors-like Harvest Gold or Deep Iris-are metallic or pearl, my number one tip is to shake that bottle like it owes you money. The tiny sparkles (the "micas") like to settle at the bottom. Shake it for a full two minutes before you even think about opening it.

When you're ready to apply, don't try to fill a chip in one big, thick drop. Use the tip of the brush (or even a wooden toothpick) to dab on a thin layer, let it dry for 20 minutes, and then go back for a second layer if needed. For deep colors like Toreador Red, matching that rich depth requires patience, so build it up slowly rather than rushing the process.

Mercury Tracer Colors by Year

Let us know the year your Tracer was manufactured. We'll eliminate colors that won't match your vehicle.

Are we missing something?

We're always expanding our catalog! If you can't find your vehicle, please let us know and we'll do our best to find the color you need.