COLOR CODEPKW/PDW - Winter WhiteHyundai Touch-Up Paint

The Look

If you drive a Tucson from the late 2010s, you are likely very familiar with this shade. It is a crisp, refrigerator-cool white that gives the car a modern, utilitarian edge. Since your car has likely seen a few seasons of road salt and sun, you will notice that this color stays remarkably bright compared to older, creamier whites. It is a hardworking, honest color that defines the "standard" look for the Hyundai SUV lineup, though it does tend to highlight every bit of road grime and tar you pick up on the commute.

Technical Details

This is a single-stage solid finish, which is actually great news for your repair. Unlike the complex pearl whites that require three different layers, this color relies on pure pigment. Because there are no metallic flakes to worry about, you do not have to fret over "mottling" or the paint looking darker from different angles. However, solid whites are unforgiving when it comes to surface prep. Any speck of dust trapped under the paint will look like a mountain on a flat plain, so ensure your work area in the garage or shade is as clean as possible.

Best Practices

Before you spray or dab Hyundai Winter White (check for code PKW/PDW), you need to shake it for 60 seconds. You can find your paint code on the manufacturer's sticker located on the driver's side door jamb-it is usually a silver or black plate near the latch. To ensure a professional result, always test the color on the included card before touching the car. Whether you are using a nozzle or a brush, apply the paint in thin, light layers rather than one heavy coat. Keep the container moving to avoid drips, and allow at least fifteen minutes of drying time between layers to let the solvents escape properly.