COLOR CODE748531K - Medium Fern MetallicFleetwood Touch-Up Paint

The Look

Fleetwood motorhomes from the early 2000s were designed to feel at home in the great outdoors, and this color is a perfect example of that philosophy. It is a deep, organic green that mimics the forest canopy, helping a massive vehicle feel more grounded and less imposing when parked at a campsite. Because these rigs have likely seen thousands of miles of sun and highway debris over the last two decades, you might notice that the original finish has softened. This shade is excellent at hiding the inevitable road film and dust that comes with cross-country travel, making it a very forgiving color for long-term ownership.

Technical Details

This is a metallic finish, which means it relies on tiny flakes to create its signature depth and luster. Metallic paints are distinct because those flakes settle at the bottom of the container, and if they are not distributed perfectly, you might end up with dark patches or stripes known as mottling. When the flakes clump together, the color looks more like a muddy forest floor than a shimmering fern. To get a professional result, you must ensure those particles are floating evenly so they can catch the light at the same angle as the surrounding panels on your motorhome.

Best Practices

Before you spray or dab Fleetwood Medium Fern Metallic (check for code 748531K), you need to shake it for 60 seconds. You can usually find your paint code on the data plate inside a kitchen cabinet, on the driver door frame, or tucked away on a build sheet in the bedroom closet. Once you have moved your project into the garage or the shade, keep the container moving to prevent the metallic flakes from pooling in one spot. This ensures an even flow and a consistent shimmer across the repair area. Test the color on the included card first to verify the match and see how the metallic particles settle before you move on to the actual bodywork. Pay close attention to the drying time between layers to prevent the paint from sagging on the large vertical surfaces of your rig.