COLOR CODEWA472B/WA485B/GE8/GP5 - Abalone White TricoatChevrolet Touch-Up Paint

The Look

Abalone White is the high-tech cousin of the standard flat white you see on delivery vans. Since your Bolt or Camaro has likely been on the road since 2017, you have probably noticed how this color changes depending on the light. On the sharp lines of a Camaro, it adds a muscular depth, while on the Bolt, it gives the car a clean, futuristic aesthetic. Unlike a solid white that can look a bit rental-car basic, this finish has a sophisticated glow. It does a decent job of hiding light road dust, but it will highlight iron fallout and orange rail dust, so keep it clean to maintain that crisp look.

Technical Details

This is a pearlescent tricoat finish, which means it is far more complex than a standard paint job. The "tricoat" name tells you there is a solid base layer followed by a translucent mid-layer that contains the pearl flakes. The challenge with Chevrolet Abalone White Tricoat (check for code WA472B/WA485B/GE8/GP5) is the layering. Because the pearl layer is see-through, the final shade depends entirely on how many passes you make. If you apply too many layers of the pearl, the repair will look darker or more yellow than the rest of the car. If you apply too few, the repair will look like flat, dull white.

Best Practices

To find your exact match, look for the silver Service Parts Identification sticker. On the Camaro, it is usually on the bottom side of the carpet liner in the trunk; on the Bolt, look in the trunk floor area or scan the QR code on the driver-side door pillar. Before you apply any paint, shake the container for at least a full minute to ensure the pearl flakes are not clumped at the bottom. Test the color on the included card first to figure out exactly how many layers of pearl you need to match your car's specific depth. When applying, keep the container moving to avoid "mottling," where the flakes bunch up and create dark spots. Give each layer enough drying time so the paint sets properly before you add the next coat. Always work in the shade or a garage to keep the surface cool.