COLOR CODEFLNA94169 - Pewter Pearl MetallicWinnebago Touch-Up Paint

The Look

This color is the workhorse of the Winnebago lineup for a reason. It is a sophisticated neutral that handles the realities of the road, effectively hiding the dust and road grime that accumulates between stops. Because this shade has been a staple since 2011, your coach has likely spent a significant amount of time under the sun. This means the original finish may have shifted slightly from its factory state, so your repair will need a light touch to blend in with the surrounding panels. It is a classic choice for the View, Navion, and larger Class A models because it offers a high-end shimmer without the maintenance headache of a darker color.

Technical Details

You are working with a pearl metallic finish, which is significantly more complex than a standard solid color. The metallic flakes provide the sparkle, while the pearl pigment adds a soft glow that shifts as you walk past the vehicle. The main risk with this type of paint is mottling-where the flakes clump together and create dark, uneven streaks. This usually happens if the paint is applied too heavily or if the container isn't mixed properly. To get a factory-quality look, you want to avoid heavy layers that might cause the pigments to pool and ruin the reflective effect.

Best Practices

Winnebago typically hides the color information on a specification label inside the driver-side door jamb or on a sheet attached to the wall inside a wardrobe closet. Before you spray or dab Winnebago Pewter Pearl Metallic (check for code FLNA94169), you need to shake the container for at least 60 seconds to lift the heavy metallic particles off the bottom. Test the color on the included card to verify the match against your specific level of sun-fade. When you are ready to apply, work in a cool garage or shade and keep the container moving to ensure an even flow. Give the paint plenty of drying time between layers to allow the pearl pigments to lay flat and catch the light correctly.