WA6279 - Dark Gray (matt) Pontiac Touch Up Paint

The Look

Since your Montana has spent years on the road, this trim color has likely seen its fair share of curbs and gravel. This isn't a showy paint meant to catch the sun; it is a hardworking, functional shade used for the lower body cladding and bumpers. It provides a rugged contrast to the main body color and is excellent at hiding the road grime that inevitably splashes up during a family road trip. Over time, the sun can make this finish look chalky, so a fresh application goes a long way in making the van look cared for again.

Technical Details

This is a matte metallic finish, which presents a specific challenge for your repair. Unlike standard glossy paints, the metallic flakes in this mixture are suspended in a flat base. If the paint is applied too heavily in one area, the flakes will cluster and create dark patches or stripes. You must also remember that because the finish is matte, you cannot sand or polish the area once you are done. Any attempt to buff out a mistake will create an accidental shine that will make the repair stand out against the original flat texture of the trim.

Best Practices

You will usually find your paint code on the silver Service Parts sticker located inside your glove box. Before you spray or dab Pontiac Dark Gray (matt) (check for code WA6279), you need to shake it for 60 seconds to ensure the metallic flakes and flattening agents are thoroughly mixed. Test the color on the included card to see how the flakes settle before you touch the car. Keep the container moving to apply the paint in thin, light layers rather than one heavy coat. Respect the drying time between layers to prevent the paint from pooling, which is the best way to maintain that consistent, non-reflective look across the repair.