Pueblo Gold Metallic (G3/M7113) Touch-Up Paint for Mercury

The Look

You likely see this color on a Mountaineer or Montego that has spent years navigating parking lots and highways. It was a flagship choice for Mercury during the mid-2000s because it carries a quiet, upscale weight without being flashy. Gold is incredibly forgiving when it comes to road salt and dust, so your car probably looks cleaner than it actually is most of the time. However, because your vehicle has been on the road for about two decades, the original finish might have lightened or shifted from the factory standard. You should expect the fresh paint to look slightly richer than the weathered panels around it.

Technical Details

This is a metallic finish, which means it relies on thousands of tiny flakes to reflect light and create depth. Metallics are more demanding than solid colors because those flakes need to settle in a uniform pattern to look correct. If the flakes clump together, you will see dark patches or uneven stripes across the repair area. This mottling effect happens most often if the paint is applied too heavily or if the flow is too concentrated in one spot. Consistency is the only way to make the gold look like it belongs on the car.

Best Practices

You will find your paint code on the driver's side door jamb, usually located directly under the barcode on the vehicle identification sticker next to the "EXT PNT" label. Before you spray or dab Mercury Pueblo Gold Metallic (check for code G3/M7113), you need to shake it for 60 seconds. This is the only way to get those settled metallic flakes back into the mix so the color actually matches. Always work in a cool spot in the garage or the shade to prevent the sun from shortening your drying time. Test the color on the included card to see how the flakes lay before you move to the car. While you apply the paint, keep the container moving to ensure the gold looks uniform from every angle.