COLOR CODEMAZ4389 - Carbon Black (matt)Mazda Touch-Up Paint

The Look

Your Mazda Tribute uses this specific shade to ground its design. It most often appears on the lower panels and rugged trim to provide a flat, utilitarian contrast to the glossy sheet metal above. After over a decade of exposure to the sun and road debris, this black often loses its deep charcoal soul and begins to look chalky or grey. This color is not meant to reflect the world around it; it is meant to absorb light and give the vehicle a sturdy, off-road appearance.

Technical Details

This is a solid finish without any metallic flakes or pearl powders. Because the finish is matte, the final result depends entirely on the surface texture. There is no clear coat to hide mistakes or provide a high-shine shield. The biggest risk with this paint is accidental polishing. If you rub the finished repair too hard with a cloth or try to use a buffing compound, you will create a permanent shiny spot that ruins the flat effect. The goal is a uniform, low-sheen surface that blends with the original plastic-like texture.

Best Practices

You can find your paint code on the identification plate located inside the driver side door jamb. Before you spray or dab Mazda Carbon Black (matt) (check for code MAZ4389), you need to shake it for 60 seconds. This step is vital because the agents that create the matte look settle at the bottom of the container. If you skip the mixing, the paint will dry with an incorrect, glossy shine. Test the color on the included card to ensure the darkness matches your weathered panels. Work in the shade and keep the container moving to ensure the paint lands in a light, even layer. Allow for plenty of drying time between applications to prevent the paint from pooling or trapping moisture.