COLOR CODE266152 - Rosso Folgore MetallicMaserati Touch-Up Paint

The Look

This is not the loud, bright red associated with Italian race tracks. It is a mature, wine-colored shade that carries a heavy presence. Since your Maserati has been on the road since 2015, you probably know that this color changes its personality based on the sun. In the shade, it looks almost black or deep chocolate, but the light pulls out a rich, dark depth. Because this was a premium choice for the Ghibli and Quattroporte during that era, it was designed to emphasize the curves of the bodywork. While it looks expensive, this dark pigment shows road dust quickly, so keeping the finish clean is the only way to maintain that lightning-inspired glow.

Technical Details

This finish relies on metallic flakes to create its signature look. The biggest risk when you are working with this type of paint is mottling. If the paint goes on too heavy in one spot, the metallic particles will bunch together and create dark, cloudy patches that look like shadows on the panel. However, the benefit of a metallic like this is its ability to hide tiny surface scratches. Solid reds show every swirl mark, but the sparkle in this formula deflects light and masks minor imperfections. You are dealing with a sensitive pigment that requires thin layers to ensure the flakes lay down flat and uniform across the repair area.

Best Practices

You will find your paint ID on a silver sticker located either on the underside of the hood or along the driver's side door pillar. Before you spray or dab Maserati Rosso Folgore Metallic (check for code 266152), you need to shake it for 60 seconds. The heavy metallic flakes settle at the bottom of the container and must be fully integrated to get the right color match. Test the color on the included card to see how the shade looks once it dries. When you move to the car, keep the container moving to avoid puddling. Apply several light coats rather than one thick one, and allow plenty of drying time between each pass so the metallic particles stay exactly where you want them.