T3 - Satellite Silver Metallic Lincoln Touch Up Paint

The Look

The 2007 Lincoln Town Car holds a special place in the history of the Panther platform, and your car carries a finish that was only available for that single model year. This specific silver is crisp and technical, lacking the warm, beige undertones found in the silvers of the early 2000s. It was designed to give the flagship sedan a more contemporary, metallic edge. Since your car has likely been on the road for nearly two decades, the original finish may have shifted slightly due to UV exposure, but the underlying brilliance of the pigment remains distinct.

Technical Details

This is a true metallic finish, which means the secret to a good repair is flake control. The paint contains tiny particles that must lay flat to reflect light properly. If you apply the paint too thick or hold your hand still for too long, the flakes will bunch up and create dark, blotchy areas known as mottling. This effect is especially noticeable on the large, flat panels of a Town Car, like the hood or trunk. To get the best result, you want the light to bounce off the repair at the same angle as the rest of the panel.

Best Practices

Before you spray or dab Lincoln Satellite Silver Metallic (check for code T3), you need to shake it for 60 seconds. You can find this code on the driver's side door jamb label, listed next to the letters "EXT PNT." Shaking the container is mandatory because metallic flakes are heavy and sink to the bottom; if you don't mix them thoroughly, the color will look too dark. Test the color on the included card to ensure the flake density looks right. When applying, use light layers and keep the container moving to avoid heavy buildup. Ensure you allow enough drying time between coats so the paint sets firmly and the metallic particles stay exactly where you put them.