COLOR CODE8D/6056 - Deep Sandlewood MetallicLincoln Touch-Up Paint

The Look

This color is the definitive choice for the mid-eighties luxury era. It was found across the entire lineup, from the boxy Town Car to the more aerodynamic Mark VII. It represents a time when Lincoln leaned into earthy, sophisticated tones to signal status. Since your car has been on the road for nearly four decades, the original finish has likely developed a character of its own. This deep, warm tan is excellent at hiding road dust, but it relies on a specific shimmer to look its best.

Technical Details

You are working with a metallic finish, which means the paint is loaded with tiny aluminum flakes. These flakes are responsible for the depth of the color, but they present a challenge during application. If the paint is applied too heavily or unevenly, these particles can cluster together. This creates a mottled effect that looks like dark streaks or tiger stripes across the panel. To get a factory-correct look, those flakes need to lay flat and distributed evenly across the surface.

Best Practices

Your paint code is located on the driver's side door jamb, usually on a sticker labeled Exterior Paint. Before you spray or dab Lincoln Deep Sandlewood Metallic (check for code 8D/6056), you need to shake it for 60 seconds. The metallic flakes are heavy and settle at the bottom of the container, so thorough mixing is the only way to ensure the color matches the rest of your car. Test the color on the included card to confirm the flake density before you move to the vehicle. Work in a garage or the shade to keep the surface cool. Apply several thin layers rather than one thick one, and always keep the container moving to prevent the metallic particles from pooling. Give the paint plenty of drying time between coats to ensure a level finish.