MNH - Sparkle SilverLand-Rover Touch Up Paint

The Look

Since your Range Rover Sport has been on the road for a decade, you already know that this color defines the classic Land Rover aesthetic. It is a hardworking, industrial silver that manages to look expensive even when it is covered in road salt or dust. While some modern silvers lean toward a blue or white undertone, this specific shade has a slightly grayer, heavier presence that grounds the vehicle. It is the kind of finish that hides small scratches from the trail well, but when you have a deep gouge, the high-contrast flakes make the damage stand out.

Technical Details

This is a coarse metallic finish, which means the paint is packed with larger-than-average metal flakes to catch the light. The benefit is a deep, textured shimmer that makes the body panels of your SUV look like solid machined aluminum. The risk, however, is mottling. If the flakes do not land evenly, you will see dark patches or shadows where the metal has clumped together. Because these flakes are heavy, they like to sink to the bottom of the container. If you do not mix them thoroughly, you will end up with a flat gray color at the start and a concentrated silver mess at the end.

Best Practices

You can find your factory plate on the driver's side door jamb or tucked under the hood on the radiator support bar. Before you spray or dab Land-Rover Sparkle Silver (check for code MNH), you need to shake it for 60 seconds. This is a metallic, so the mixing stage is the most important part of the job. Once the flakes are suspended, test the color on the included card to ensure the metallic density looks right. When applying, keep the container moving in steady, even passes to avoid piling up too much paint in one spot. Give the repair plenty of drying time between layers; rushing the process will trap the solvent and make the silver look dull or muddy.