COLOR CODE8537L - Silver Gray MetallicJaguar Touch-Up Paint

The Look

This is the definitive shade of the 1960s British motoring boom. If you own an E-Type, a Mark II, or an S-Type from this era, you are dealing with a color that defines sophistication without needing to shout. It carries a depth that solid grays lack, making the curves of your car look like they were carved from a single block of industrial silk. Because your Jaguar has likely seen decades of sun and road wear, the original finish might have shifted slightly, but this pigment captures the cool, mercury-like essence that made these cars icons in the first place.

Technical Details

This finish is a true metallic, which means it relies on tiny suspended flakes to catch the light. While the metal gives the car its signature glow, it also makes the repair a bit more demanding than a standard solid color. If you apply the paint too heavily in one spot, the flakes will sink or cluster, creating dark, blotchy patches known as mottling. To avoid these shadows, you must ensure the flakes lay down flat and even across the surface. Metallic silvers are honest colors; they will show every ripple in your technique, so patience during the application is your best tool for a professional result.

Best Practices

Before you spray or dab Jaguar Silver Gray Metallic (check for code 8537L), you need to shake the container for at least sixty seconds. This isn't just a suggestion; the heavy metallic flakes settle at the bottom and must be fully integrated to get an accurate match. You can usually find your identification plate on the firewall inside the engine bay or tucked into the driver-side door jamb. Always test the color on the included card to see how the light hits the flakes before you touch the car. When you begin, keep the container moving in steady passes and wait for the proper drying time between thin layers. If you are working in a garage or under a shade, make sure you have enough light to see the flake distribution as you go.