COLOR CODE14/WA308N - Cosmic Quartz MetallicIsuzu Touch-Up Paint

The Look

Your 2006 Isuzu Ascender might be a rare sight on the road these days, but this color remains one of the most sophisticated finishes from Isuzu's final passenger vehicle era. Because your vehicle was born from a deep partnership with General Motors, you are essentially dealing with a high-end truck finish disguised as a Japanese import. This isn't just a simple grey; it is a deep, brooding charcoal that gives the boxy SUV a premium, executive feel. Since your vehicle has been out in the world for nearly twenty years, the original finish has likely weathered its share of storms, making a fresh touch-up the only way to restore that heavy-duty, modern edge.

Technical Details

This is a true metallic finish, which means it relies on thousands of tiny flakes to reflect light and provide visual depth. The biggest challenge with a dark metallic like this is mottling-those annoying dark spots or stripes that happen when the flakes don't lay down flat. If you apply the paint too heavily in one spot, the flakes will swim in the wet pigment and clump together, which ruins the uniform look of the finish. While this dark shade is excellent at hiding light road dust and grime, it will highlight every tiny scratch or swirl mark. You need a clean surface and a steady hand to make sure the repair disappears into the rest of the panel.

Best Practices

On the Ascender, you will usually find your identification sticker tucked away inside the glove box. Before you spray or dab Isuzu Cosmic Quartz Metallic (check for code 14/WA308N), you must shake the container for at least a full minute to wake up those heavy metallic particles. Test the color on the included card first to ensure the flake distribution looks right. Whether you are using a nozzle or a brush, apply the paint in thin, light layers and always keep the container moving to prevent the pigment from pooling and turning too dark. Give it plenty of drying time between layers, and remember that a clear coat is mandatory to bring out the depth of the quartz flake and protect the repair from the sun.