COLOR CODEN2 - Pure Pearl TricoatHyundai Touch-Up Paint

The Look

This finish had a prestigious but short run in 2005. It served as the flagship white for the luxurious XG350 and premium editions of the Sonata and Terracan. Unlike the flat whites of the era, this color was designed to give these models a more upscale, sophisticated presence on the road. Because your vehicle has been out in the world for nearly two decades, the original finish has likely softened or yellowed slightly from the sun. This age gives the paint a specific character that you should keep in mind as you begin your repair.

Technical Details

This is a tricoat finish, which is significantly more complex than a standard solid color. It relies on a multi-stage process involving a solid base layer followed by a translucent pearl mid-layer. The pearl is what creates that depth, but it is also where the difficulty lies. If you apply the pearl layer too heavily, the repair will appear darker or more yellow than the surrounding area. If you go too light, the spot will look flat and chalky. It is all about finding the right balance of layers to mimic the depth of the factory finish.

Best Practices

You can verify your color by checking the manufacturer's sticker located on the driver's side door jamb or the door edge. Before you spray or dab Hyundai Pure Pearl Tricoat (check for code N2), you need to shake it for 60 seconds. This ensures the pearl particles are evenly distributed throughout the liquid. Test the color on the included card first; this allows you to count how many coats of pearl are required to get the right look. When applying the paint, keep the container moving to ensure an even flow and prevent heavy spots. Give the paint plenty of drying time between each layer so the finish stays crisp and level in your garage or shade.