COLOR CODEJR - Pearl White TricoatHyundai Touch-Up Paint

The Look

Your Hyundai was likely the standout on the block when it first came home. This specific shade was a premium choice for owners of the Santa Fe, Sonata, and Elantra because it offered a level of depth that a standard flat white simply cannot replicate. On a Sonata, it highlights the sweeping body lines with a soft, glowy reflection, while on a larger Santa Fe, it helps the vehicle look modern rather than like a commercial van. Since your car has likely been on the road for a decade or more, you may notice the original finish has developed a warm, creamy character compared to newer vehicles.

Technical Details

This is a pearl finish, which means it relies on a tricoat process to create its signature look. Unlike a basic metallic that has sparkles mixed into the paint, a tricoat uses a solid base layer followed by a semi-translucent pearl middle layer. This layering is what creates the "shimmer" as light passes through the pearl and reflects off the white underneath. The risk here is depth. If you apply the mid-coat too thick, the repair will look darker or more yellow than the rest of the panel. If you go too thin, it will look like a flat white patch. It takes patience to build the layers so they match the surrounding aged paint.

Best Practices

You can find your color identification on the manufacturing sticker located inside the driver's side door jamb. Before you spray or dab Hyundai Pearl White Tricoat (check for code JR), you need to shake it for 60 seconds. This ensures the pearl flakes are not sitting at the bottom of the container. Test the color on the included card first to see how many coats of the pearl layer you need to reach the right shade. When applying, keep the container moving to avoid heavy spots that can ruin the pearl effect. Give each layer enough drying time so the finish stays crisp and does not get cloudy in the garage or shade.