COLOR CODE2002 - Impact Blue MetallicHarley-Davidson Touch-Up Paint

The Look

This is the quintessential early-2000s cruiser aesthetic. It captures a specific moment in motorcycle history where the brand moved toward deeper, more sophisticated tones that still felt rugged. On the road, this blue feels substantial and grounded, but the metallic element gives it a life of its own when the sun hits the tank. Because this color was used across the lineup, from Sportsters to Fat Boys, it has a universal appeal that looks just as right parked at a diner as it does leaning into a mountain curve. Since your bike has been out in the elements for over twenty years, expect the original finish to have matured, likely losing a bit of its initial bite to the sun.

Technical Details

This finish relies on a heavy metallic load to achieve its depth. Metallics are notorious for "mottling," which is just a fancy way of saying the metal flakes can clump together and create dark, blotchy patches or uneven stripes. If you see shadows forming as you work, it usually means the flakes are not laying flat. This is a two-step system, so the color itself will dry to a dull, flat finish. Do not panic when it looks matte; the depth and protection only arrive once you apply the clear coat. Before you spray or dab Harley-Davidson Impact Blue Metallic (check for code 2002), you need to shake it for 60 seconds.

Best Practices

Start by hunting down your paint code sticker, which is typically found on the frame neck near the steering head or tucked along the down tube. If the sticker is long gone, your local dealer can verify the color using your VIN. To get the best results in your garage or in the shade, you must keep the container moving at a steady pace to prevent the metallic particles from sagging. Test the color on the included card to see how it reacts to your specific lighting. When you move to the bike, apply thin, even layers. Heavy coats will cause the metallic flakes to swim and sink, ruining the uniform look of the factory finish. Give it plenty of drying time between layers to ensure the pigments lock into place.