COLOR CODE526 (1968) - IvoryGMC Touch-Up Paint

The Look

This isn't the cold, sterile white you find on a modern refrigerator. This shade belongs on the heavy steel of a 1968 GMC truck, where it served as the soft, buttery counterpoint to the bold primary colors of the era. It has a warm, vintage depth that makes a pickup look like it actually has a history. Because it is an off-white, it does a decent job of masking road dust, but it will highlight any rust or oil spots that have accumulated over the decades. Your truck has survived over half a century, so this color needs to look like it belongs to that legacy rather than looking like a bright patch of correction fluid.

Technical Details

As a solid finish, you do not have to worry about metallic flakes settling unevenly or creating dark shadows. The challenge with a solid ivory is the coverage. If your repair area has dark primer or bare metal, the light pigment might require more layers to fully hide the work underneath. While solid colors are easier to blend than pearls, they are honest. They show every ripple and sand scratch in the surface. Since there is no sparkle to distract the eye, your prep work in the garage or under the shade is what determines the final quality.

Best Practices

Before you spray or dab GMC Ivory (check for code 526 (1968)), you need to shake the container for at least sixty seconds to ensure the pigments are fully mixed. You can usually find your paint information on the Service Parts ID label located inside the glove box door. Before applying anything to your truck, test the color on the included card to verify the match against your aged finish. When you start, keep the container moving to avoid heavy buildup and maintain a consistent flow from the nozzle or brush. Give each layer enough drying time so the paint does not sag or run while you work.