COLOR CODEN5M - Carbon Metal MetallicGenesis Touch-Up Paint

The Look

This is the executive choice for the modern Genesis lineup. Since your G80 or GV80 has likely seen its share of highway miles, you probably noticed how this shade balances depth and practicality. It is a dense, moody charcoal that gives the car a sense of weight and presence without the maintenance headaches of a pure black. On the G70, it highlights the sharp character lines, while on the larger G90, it feels substantial and expensive. It does a fair job of hiding road film, but once the sun hits it, those flakes need to be bright to carry the look.

Technical Details

This finish is a true metallic, which means it relies on tiny flakes to reflect light from different angles. This is where most people run into trouble. Because the metal particles are suspended in the liquid, they have a tendency to settle or clump. If you apply the paint too heavily in one spot, the flakes will sink and create a dark, blotchy effect known as mottling. If you go too light, the finish can look dry and textured. You want a consistent, even distribution so the light bounces off the surface uniformly across the repair area.

Best Practices

You can find the identification sticker inside the driver's side door jamb on the frame. Before you spray or dab Genesis Carbon Metal Metallic (check for code N5M), you need to shake it for 60 seconds to ensure the metallic flakes are fully suspended. Test the color on the included card to verify the match before touching the car. When applying, keep the container moving to avoid puddling. Work in a dry, covered garage rather than in direct sunlight. Use several thin layers rather than one thick one, allowing enough drying time between each pass. This patience ensures the flakes lay flat and the repair disappears into the surrounding panels.