COLOR CODE53907 - SandFour-Winns Touch-Up Paint

The Look

This tan neutral is a staple of the mid-2000s era, providing a warm, earthy alternative to the standard stark whites found on most hulls. Because your boat has likely spent years out on the water, you probably appreciate how well this shade hides hard water spots and dried salt spray. It was a common choice for the Horizon and Vista lineups during those years because it stays cool in the sun and maintains a sophisticated, understated profile. Whether you are touching up a small nick on the swim platform or a scrape on the bow, this color blends into the natural lines of the boat without drawing unnecessary attention.

Technical Details

This is a solid finish, which makes your job much easier. You do not have to worry about metallic flakes settling at the bottom of the container or creating dark, uneven stripes as you work. The main challenge with a solid beige is ensuring the pigment remains perfectly suspended. If you apply the paint too heavily in one area, the pigments can pool, making the repair look slightly darker than the original finish. Since your boat has been exposed to UV rays for a while, the original gelcoat might have lightened slightly, so focus on thin, even layers to find the right depth.

Best Practices

Finding the official identification on a boat is different than a car, so look for your Hull Identification Number on the transom if you need to verify your build details with a dealer. Before you spray or dab Four-Winns Sand (check for code 53907), you need to shake the container for at least sixty seconds to fully integrate the pigments. Test the color on the included card to confirm the match before touching the hull. Work in your garage or in the shade to keep the surface cool. Keep the container moving at a steady pace to prevent the paint from bunching up. Allow at least fifteen minutes of drying time between each thin layer to ensure the finish stays flat and professional.