COLOR CODE2655 (1957) - Torch RedFord Touch-Up Paint

The Look

The 1957 F-Series launch was a turning point for American trucks, and this color was the face of that revolution. It is a loud, confident red that defines the classic mid-century workhorse. Because your truck has been on the road since the Eisenhower era, the original finish has likely shifted toward a flatter, orange-hued patina. When you apply a fresh coat, expect it to look significantly more vibrant and saturated than the aged metal around it. This red was designed to demand attention from across the job site, and even decades later, it still does exactly that.

Technical Details

This is a heavy-pigmented solid finish, which is excellent news for your repair. Unlike metallics, you do not have to worry about flakes standing on end or creating dark stripes if your technique is slightly off. However, reds are notoriously thick and prone to fading. Because the pigment is so dense, you might find that it covers the surface quickly, but it also means the paint can settle at the bottom of the container. If you do not mix it thoroughly, you will end up with a translucent pinkish smear instead of the deep, rich red you expect.

Best Practices

On these vintage models, you can usually find your rating plate on the driver's side door pillar or tucked inside the glove box door. Before you spray or dab Ford Torch Red (check for code 2655 (1957)), you need to shake it for 60 seconds. Do not skip the prep work in your garage or a patch of shade; heat and direct sunlight will make the paint dry too fast, leaving a textured, sandy feel. Always test the color on the included card to see how the new pigment sits against your truck's current age. When applying, keep the container moving to ensure an even flow and prevent heavy ridges. Give the surface plenty of drying time between layers to avoid trapping solvents that could dull the shine.