96/6283 - Medium Dark Titanium Metallic Ford Touch Up Paint

The Look

This color is the definition of late-80s industrial cool. It made a brief but impactful appearance in 1988, gracing a wide variety of Ford vehicles during a time when the brand was transitioning into more aerodynamic designs. Since your vehicle has been on the road for over three decades, the original finish has likely weathered into a more muted, matte version of its former self. It is a deep, moody grey that provides a sophisticated alternative to the brighter silvers of that era, looking particularly sharp on the trim and bodies of trucks and classic sedans.

Technical Details

This is a complex metallic finish, which means it relies on tiny flakes to reflect light and provide depth. Metallics are notoriously temperamental because those flakes want to clump together. If they do, you will end up with dark blotches or tiger stripes that make the repair look uneven. The goal is to get those flakes to lay flat and spread out. If the paint goes on too thick or too wet, the heavy metallic particles will sink and ruin the uniform look of the finish.

Best Practices

Before you dab or spray Ford Medium Dark Titanium Metallic (check for code 96/6283 on the silver certification label inside your driver-side door jamb), you must shake the container for two full minutes. This agitation is the only way to ensure the metallic flakes are properly suspended in the mix. Test the color on the included card first to see how the light hits the flakes. When you move to the vehicle, work in the shade and keep the container moving at all times to avoid pooling. Allow plenty of drying time between light layers to ensure the metallic particles stay exactly where they land.