COLOR CODE3P/5783 - Medium Brite Blue MetallicFord Touch-Up Paint

The Look

This shade represents the peak of the early 1980s Ford truck era. When you see this blue on a Bronco II or a first-generation Ranger, it immediately brings back memories of boxy fenders and chrome trim. It is a bright, high-energy color that captures the transition from the rugged 1970s to the more modern, technical aesthetic of the new decade. Since your vehicle has likely spent forty years on the road or in the dirt, this blue probably shows some character. It is a hardworking color that looks best when the light hits those square body lines, reminding everyone why these trucks became legends in the first place.

Technical Details

Before you spray or dab Ford Medium Brite Blue Metallic (check for code 3P/5783), you need to shake it for 60 seconds. This is a metallic finish, which means millions of tiny flakes are sitting at the bottom of your container. If you do not mix them thoroughly, the color will look dull and the repair will stand out. Metallics are notorious for mottling, which creates dark streaks or "tiger stripes" if the paint goes on too heavy. You want thin, even layers to keep those flakes suspended properly so they catch the light rather than sinking into a dark puddle.

Best Practices

You will find your paint code on the silver identification label located on the driver's side door jamb. Because this paint has aged through decades of weather, the original finish on your Bronco or Ranger might have shifted slightly. Test the color on the included card to see how it compares to your current hood or door. When you start the repair, keep the container moving constantly to ensure the flakes distribute evenly across the surface. If the color looks too dark as you apply it, increase your spray distance slightly to let the metallic particles "land" more softly. Work in your garage or a patch of shade, and give each layer plenty of drying time to ensure the finish stays flat and uniform.