COLOR CODEE (1960) - Belmont Blue PolyFord Touch-Up Paint

The Look

Belmont Blue Poly is a true time capsule of 1960. It was a signature shade for the debut of the Falcon, marking Ford's shift toward smaller, more efficient cars without sacrificing the metallic flair of the era. This isn't a loud, aggressive blue; it is a sophisticated, softer tone that reflects the optimism of the early space age. Since your Falcon or full-size Ford has been on the road for over sixty years, the original finish has likely shifted slightly due to sun exposure. This makes a careful touch-up essential to blending the old with the new.

Technical Details

The "Poly" in the name tells you this is a metallic finish. These finishes rely on tiny flakes to catch the light, which gives the car its characteristic shimmer. The challenge with any metallic from this period is the flake distribution. If you apply the paint too heavily in one spot, the flakes will bunch up and create dark, blotchy patches called mottling. To avoid this, you must focus on thin, even layers. This allows the metallic particles to lay down flat and uniform across the surface of the metal.

Best Practices

You can find your paint code on the data plate located on the driver side door jamb or the rear edge of the door itself. Before you spray or dab Ford Belmont Blue Poly (check for code E (1960)), you need to shake the container for at least sixty seconds. This ensures the metallic flakes are fully suspended and not stuck at the bottom. Always test the color on the included card to verify the match against your current paint. When applying, keep the container moving at a steady pace to maintain a consistent flow. Several light coats are better than one heavy coat, as they prevent runs and help the flakes settle correctly. Give the paint plenty of drying time between each layer to ensure a durable and level finish in your garage or shade.