CV54677R-G - Light Saddle Metallic -748527k Fleetwood Touch Up Paint

The Look

Your 2004 Fleetwood was built to command the road, and this champagne-toned tan was the height of motorhome sophistication during that era. It isn't just a flat beige; it has a depth that catches the morning sun and does a fantastic job of hiding the dust you pick up between campsites. Since your coach has likely been chasing the sun for twenty years, the original finish might be slightly more weathered than the fresh paint in your hand, so keep that in mind as you begin your repair.

Technical Details

This is a metallic finish, which means the secret to a good match is all in how the flakes settle. If you apply the paint too heavily in one go, the metallic particles will clump together or sink, making the repair look darker and muddy. To get that factory sparkle, you need to apply the paint in thin, even layers. This prevents mottling-those dark streaks or shadows that happen when the metallic bits do not distribute properly across the surface.

Best Practices

Before you apply Fleetwood Light Saddle Metallic -748527k (verify your code CV54677R-G on the data plate usually found inside your wardrobe door or on the driver's side wall), you must shake the container for a full sixty seconds. Those heavy metallic flakes love to settle at the bottom and need to be fully suspended. Test the color on the included card to see how the finish reacts to your technique. When you move to the vehicle, keep the container moving to ensure the flakes lay down flat. Give each layer enough drying time before adding the next to build up the color slowly and accurately.