COLOR CODEH81/PSD - Light Silver Pearl Metallic (Cladding)Eagle Touch-Up Paint

The Look

The mid-90s were the peak of the cab-forward era, and Eagle used this color to define that high-tech, aerodynamic silhouette. While many silvers from this period look like flat grey primer once the sun gets to them, the pearl in this finish gives it a distinct life. It was specifically designed for the lower panels and plastic trim, providing a sophisticated contrast or a clean monochromatic look depending on your trim level. Since your Eagle has likely been on the road since the Clinton administration, the plastic cladding has probably aged differently than the metal doors. This color is designed to bridge that gap and bring back that cohesive, showroom feel.

Technical Details

This is a Pearl Metallic finish, which means it carries a heavy load of tiny reflective flakes. These particles are what create that shimmering depth, but they are also your biggest challenge. Silver is notorious for showing every mistake; if the flakes don't lay down flat, you will see dark "zebra stripes" or blotchy patches. The pearl adds a secondary layer of complexity because the color can actually appear to change shade based on the angle of the light. If you rush the application and put it on too heavy, the silver will look muddy rather than bright.

Best Practices

You will usually find your paint code on a metal tag located on the radiator support in the engine bay or tucked away on the passenger-side inner fender well. Before you spray or dab Eagle Light Silver Pearl Metallic (Cladding) (check for code H81/PSD), you need to shake it for 60 seconds. Those metallic flakes settle at the bottom quickly, and if you don't mix them, you're just applying grey glue. Test the color on the included card to verify the flake distribution. When applying, keep the container moving at all times to ensure the pearl spreads evenly across the surface. Work in a shaded Garage or a cool spot in the Shade, and give each thin layer plenty of drying time before adding the next. This patience prevents the heavy metallic particles from sagging and ruining the effect.