COLOR CODEWA875T - Ceramic White Tricoat (matt)Chevrolet Touch-Up Paint

The Look

This is not your average refrigerator white. Whether it is wrapped around the futuristic frame of your Bolt or the aggressive lines of your Camaro, this color behaves more like a piece of industrial technology than a standard paint job. It has a clinical, high-tech depth that makes the car look like it was carved from a single block of porcelain. Because of that flat, non-reflective finish, it shows off every body line and curve without the distraction of a mirror-like shine. It is a bold choice for an owner who wants their car to look purposeful rather than just pretty.

Technical Details

You are dealing with a complex tricoat system here, which means the final look depends on layering rather than a single pass. Before you spray or dab Chevrolet Ceramic White Tricoat (matt) (check for code WA875T), you need to understand that the "matt" part of the name is your biggest challenge. This finish does not use a standard glossy top layer, so it will not forgive mistakes. If you apply too much paint in one spot, you cannot simply sand or polish the defect away later because buffing a matte surface creates a permanent, ugly shiny spot. The pearl mid-coat is what gives the white its "ceramic" soul, but if you do not keep the container moving, those tiny flakes will clump and leave dark shadows on your repair.

Best Practices

Start by hunting down your Service Parts Identification sticker, which you will likely find inside the glove box or tucked into the driver's door jamb. Since this is a multi-stage color, the pigment and the pearl effect tend to settle quickly at the bottom of the vessel. Shake your Nozzle or Pen for at least two full minutes to ensure the mix is even. Always test the color on the included card to see how many layers of the pearl mid-coat you need to match your car's specific shade. Work in a cool Garage or Shade and give each layer plenty of Drying time before adding the next. If you are using a can, maintain a steady Spray distance to avoid heavy wet spots that ruin the flat texture.