8796K - Cherry Blossom White (DFHS 866)Alumacraft Touch Up Paint

First Impressions

This is the workhorse white of the Alumacraft fleet. Between 2009 and 2011, this shade touched every model from the rugged Jon boats to the decked-out Trophy series. It isn't a "shouting" color. It's a clean, utilitarian marine staple. It keeps the hull cool under the summer sun and provides a sharp contrast against dark water. Because it was used on All Models, it defines an era of Alumacraft history. It's practical. It's bright. It just works.

Technical Details

This is a pure solid finish. You won't find any metallic flakes or pearl dust in this mix. That makes your life easier because you don't have to worry about the "mottling" or stripes that plague metallic hulls. However, white pigments are notoriously heavy. Before you spray or dab Alumacraft Cherry Blossom White (DFHS 866) (check for code 8796K), you need to shake it for 60 seconds. If you don't, the color will look thin and won't cover the repair correctly. Solid white hides salt spray well, but it shows every bit of river mud. Clean the surface until it's spotless before starting.

Painter's Tip

Tracking down the physical code on an Alumacraft can be a hunt. Start by checking the transom gusset or near the HIN plate on the back of the boat. If it isn't there, it might be on the original build sheet. When you're ready to fix that scratch in your garage, keep the container moving. Do not hover in one spot. Test the color on the included card to ensure the shade matches your weathered hull. Apply thin layers and give it plenty of drying time. If you use a pen, don't scrub the scratch-just let the paint flow into the void.