COLOR CODE834 - Red MahoganyIsuzu Touch-Up Paint

The Look

This is a deep, earthy red that defined the high-end Isuzu builds of the late eighties. Whether you are patching up a rugged Trooper or a sleek Impulse, this color brings a heavy dose of nostalgia. It isn't a bright, shouting red; it's a sophisticated, wine-like shade that was often paired with silver or beige in classic two-tone schemes. Since your vehicle has been on the road for over three decades, the paint has likely developed a unique character from years of exposure to the elements, so a little patience during the repair goes a long way.

Technical Details

This finish is a metallic, which means it relies on tiny flakes suspended in the pigment to catch the light. The challenge with any metallic is consistency. If you apply the paint too heavily in one spot, those flakes will bunch up and create dark shadows or uneven "mottling." You want to maintain a steady, even flow to ensure the shimmer looks uniform across the repair area. Because this color has a lot of depth, it can look different depending on the angle of the light, so matching the surrounding texture is just as important as matching the hue.

Best Practices

Before you spray or dab Isuzu Red Mahogany (check for code 834), you need to shake the container for a full minute to get those metallic flakes properly suspended. You can usually find your paint code on a metal ID plate riveted to the firewall inside the engine compartment or, occasionally, on the driver's door jamb. Always test the color on the included card first to verify the match against your aged finish. When you start the repair, keep the container moving at all times to avoid puddles. Use light layers and allow plenty of drying time between each pass to build the color up gradually.