COLOR CODEYPA - Pearl Mirage White TricoatSuzuki-Motorcycle Touch-Up Paint

The Look

This finish is the high-water mark for Suzuki styling, appearing on everything from the aggressive GSX-R sportbikes to the massive Boulevard cruisers. Since your bike has likely been out in the elements, you will notice this white has a deep, glass-like quality that stays bright even as it ages. It is not a flat, appliance-like white. Instead, it captures the light to emphasize the curves of your tank and fairings. Because it has been a staple since 2007, this color defines the modern Suzuki era.

Technical Details

This is a pearl tricoat, which means the finish is built in layers. Most whites are simple, but this one uses a specific base layer followed by a translucent pearl mid-coat. This depth is what makes the paint pop in the sun, but it also means you have to be careful during application. If you apply the pearl layer too thick, the finish will start to look creamy or yellow compared to the rest of the bike. If you go too thin, you lose that signature shimmer. It is a balancing act that rewards patience.

Best Practices

Before you spray or dab Suzuki-Motorcycle Pearl Mirage White Tricoat (check for code YPA), you need to shake the container for at least a full minute to ensure the pearl particles are evenly distributed. You can usually find your paint code on a small sticker located under the seat, on the seat pan, or tucked away on the rear fender. Always test the color on the included card before touching your bike to see how many layers of pearl you need to match your specific finish. Whether you are using a nozzle or a brush, keep the container moving to avoid heavy spots. Work in a cool garage or the shade, and allow plenty of drying time between layers to prevent the paint from sagging.