COLOR CODEM2Y - Medium BlueSubaru Touch-Up Paint

The Look

Your Forester or Outback likely wears this color as a quiet, dependable middle ground between a bright sky blue and a deep midnight. It is a workhorse shade that defines the modern Subaru lineup, often appearing on the Legacy and Impreza as a sophisticated alternative to the louder rally colors. Because this blue sits in the middle of the value scale, it hides road film better than black but will show white rock chips like stars in a night sky. If your car has spent years parked outside, the sun might have shifted the original hue slightly, so a perfect match requires patience and thin layers.

Technical Details

This finish is a pearl, which means it contains tiny mica flakes designed to catch the light and create depth. Unlike a solid color, these flakes have a habit of sinking to the bottom of the container while it sits on your shelf. Before you spray or dab Subaru Medium Blue (check for code M2Y), you need to shake it for 60 seconds. If you skip this, the repair will look too dark and flat because the "shimmer" is still stuck at the bottom. Since this is a pearl, you must apply a clear coat once the color is dry to protect the flakes and recreate the factory gloss.

Best Practices

You will find your paint code on a silver plate located on the passenger side center pillar door jamb or occasionally on the strut tower under the hood. Before applying any paint to your car, test the color on the included card to ensure the shade is right. When you are ready to work, make sure you are in a Garage or a patch of Shade, as direct sunlight will make the paint dry too fast and leave a bumpy texture. Keep the container moving at all times to ensure the pearl flakes spread out evenly rather than clumping in one spot. Give each layer enough drying time before adding the next; rushing will only lead to a heavy, dark blob that stands out against the original finish.