COLOR CODEW5/M7018 - Ceramic WhiteLincoln Touch-Up Paint

The Look

You are holding a piece of early 2000s luxury history. While many luxury brands were chasing heavy metallic effects during this era, this color provided a clean, architectural alternative for models like the Navigator and the Town Car. It is a clinical, bright white that lacks the yellow undertones often found in older fleet colors. Since your Lincoln has likely been on the road for over twenty years, the original finish has probably shifted due to sun exposure. This fresh pigment will look crisp and bright, so it may stand out against any panels that have weathered under the sun.

Technical Details

This is a solid finish, which is excellent news for a home repair. Because there are no metallic flakes or pearl additives, you do not have to worry about the pigment settling unevenly or creating dark, mottled stripes. However, solid whites are very honest. They do not have the visual depth to hide poor surface preparation, so every bit of dust or texture on the panel will show through the finish. The main challenge with a solid color is achieving a level surface; if the paint is applied too thick in one spot, it will create a visible ridge that catches the light differently than the rest of the car.

Best Practices

You will find your specific color identification on the driver's side door jamb, located on the safety certification sticker next to the EXT PNT label. Before you spray or dab Lincoln Ceramic White (check for code W5/M7018), you need to shake it for 60 seconds to ensure the heavy white pigments are fully mixed. Always test the color on the included card to see how it looks in the natural light of your garage or driveway. When you apply the paint, keep the container moving to avoid puddles and allow for plenty of drying time between each light pass. If you are using a pen or brush for small chips, dab the center of the damage and let the paint flow to the edges rather than trying to paint a circle.