COLOR CODESW1 - Stone White (Hard top color)Jeep Touch-Up Paint

The Look

If you are staring at a faded roof on an old TJ Wrangler or a classic XJ Cherokee, you are looking at the ultimate utility finish. This isn't a color that tries to show off; it is a clean, bright, and strictly functional white designed to reflect the sun and keep your cabin from turning into an oven. Since your Jeep has likely been through a few decades of trail dust and UV rays, the original finish has probably shifted toward a creamier or chalkier tone. This is the blank canvas of the Jeep world, and while it might look like a simple refrigerator white, it provides that high-contrast "panda" look that defines the late nineties off-road aesthetic.

Technical Details

This is a straightforward solid finish, which is a blessing for anyone working in their garage. Unlike metallic paints that can look striped or "mottled" if you don't apply them perfectly, a solid white is very forgiving and offers excellent coverage. The biggest challenge you will face is the texture. Many Jeep hard tops have a slight grain or "orange peel" from the factory. If you apply the paint too heavily in one spot, you risk filling in that texture and creating a smooth, glossy patch that stands out against the rest of the roof. Because it is a bright white, it will show every speck of dust that lands on it while it's wet, so make sure your workspace is as clean as possible before you start.

Best Practices

Before you spray or dab Jeep Stone White (Hard top color) (check for code SW1), you need to shake it for at least 60 seconds to ensure the pigments are fully integrated. You can usually find this paint code on a metal plate attached to the firewall under the hood or on the driver's side door jamb. Since white is notoriously difficult to match once the original paint has aged, you must test the color on the included card first. Hold that card up to your hard top in the sunlight to see how close the match is. When you are ready to apply, keep the container moving in steady, overlapping passes and maintain a consistent spray distance of about six to eight inches. If you are using a pen or brush for small chips, use several thin layers rather than one thick glob to prevent the paint from sagging. Give it plenty of drying time between coats to ensure the finish stays level and tough.