COLOR CODE76/WA528F - Dark Bronzemist Metallic (Bumper)Isuzu Touch-Up Paint

The Look

Your Isuzu Ascender belongs to an era when SUVs embraced sophisticated, earthy tones to bridge the gap between rugged utility and suburban class. This color was the go-to choice for lower body cladding and accents, designed to mask road salt and grime while providing a subtle contrast to the primary body color. Since your vehicle has been on the road for nearly twenty years, this bronze shade has likely weathered its fair share of grocery cart bumps and road debris. It is a practical, resilient color that rewards a careful touch-up by making the whole vehicle look years younger.

Technical Details

This finish is a traditional metallic, which presents a specific challenge for DIY repairs. The paint contains tiny flakes that give the bronze its depth and "mist" effect, but these flakes are heavy and settle quickly. If they are not distributed evenly, the repair will look like a muddy brown rather than a metallic bronze. You also run the risk of mottling-where the metal flakes clump together to create dark, uneven splotches-if the paint is applied too thick or too fast. Patience is your friend here because the way those flakes lay down determines how well the bumper matches the rest of the trim.

Best Practices

Before you apply Isuzu Dark Bronzemist Metallic (Bumper) (check for code 76/WA528F), you need to locate your identification sticker, which is usually found inside the glove box on these GM-built models. To prevent the metallic flakes from bunching up, shake the container for at least two minutes until the mixing ball rattles freely. When you start the work, keep the container moving to ensure an even flow of pigment and flake. Test the color on the included card first to see how the metallic settles before you commit to the bumper. Work in a Garage or the Shade to keep the surface cool, and allow for plenty of drying time between light coats to ensure the finish stays crisp and clear.