COLOR CODE62/WA805K - Dark Spiral Gray MetallicHummer Touch-Up Paint

The Look

This color is the silent professional of the 2007 lineup. While other H2 or H3 owners were opting for loud yellows or bright oranges, this shade gave the Hummer an industrial, armor-plated look that still feels modern today. Because it was only available for a single year on these models, it is a rare sight that separates your rig from the usual crowd. It has a deep, graphite quality that manages to look clean even after a day on the trails, making it the most practical choice for a vehicle built to get dirty.

Technical Details

This is a true metallic finish, which means it relies on a high concentration of fine flakes to reflect light and create depth. Since your vehicle has likely been facing the sun and the elements since 2007, the original finish may have shifted slightly from its factory-new state. Metallic paints are prone to looking patchy or "mottled" if the flakes are not distributed evenly. If you apply the paint too thick in one spot, those flakes will sink and lose their shimmer, leaving a dark smudge instead of a crisp repair.

Best Practices

Pop open your glove box and look for the silver Service Parts Identification sticker to confirm your match. Before you apply Hummer Dark Spiral Gray Metallic (check for code 62/WA805K), you must shake the container for at least two minutes to get those heavy metallic particles off the bottom and into the mix. Test the color on the included card to ensure the shade aligns with your current finish before you touch the vehicle. When you begin, keep the container moving in steady, light passes to prevent the flakes from piling up. Give it plenty of drying time between layers to build a uniform surface in your garage or under the shade.