COLOR CODEU7-45712 - Dark PewterFleetwood Touch-Up Paint

The Look

Since your motorhome has likely spent the better part of three decades chasing horizons, you know that 90s Fleetwood styling relied heavily on solid, grounding accent colors. This deep, industrial grey served as the anchor for many classic motorhomes, usually appearing on the lower body skirts or as a primary stripe against a lighter base. It is a workhorse of a color that handles road grime and highway dust without losing its character. While it was common on models like the Bounder and Pace Arrow, it remains a rare find today because many of these rigs have been repainted or heavily weathered.

Technical Details

This finish is a traditional metallic, which means it contains tiny flakes designed to catch the light and add depth. Because these particles are heavier than the paint itself, they tend to settle at the bottom of the container. If you do not mix it thoroughly, you risk a finish that looks blotchy or uneven. Metallics can be temperamental in the sun; if the paint pools in one spot, the flakes will bunch together and create dark streaks or a "mottled" look. Before you spray or dab Fleetwood Dark Pewter (check for code U7-45712), you need to shake it for 60 seconds to ensure those flakes are suspended evenly for a consistent look.

Best Practices

You can usually find your paint identification plate on the inside of a wardrobe door or tucked away in a kitchen cabinet. If it is not there, check the wall paneling near the driver's seat. To get the best results in your garage or a patch of shade, always test the color on the included card first. This allows you to see how the metallic flakes lay down before you touch the actual vehicle. When applying the paint, keep the container moving at a steady pace to prevent the material from building up too heavily in one area. If you are using a pen or brush for small chips, use light, thin layers and allow for plenty of drying time between each pass.