COLOR CODEWA8265 - TanChevrolet Touch-Up Paint

The Look

This isn't a color designed for suburban driveways; it is a job-site tan built for the long haul. Because the Kodiak is a pure workhorse, this shade was engineered to mask road dust and dried clay better than almost anything else in the GM fleet catalog. Since your truck has likely spent years exposed to the elements, you will find that this color holds its integrity against the sun better than darker pigments. It provides a no-nonsense, professional finish that keeps a hard-working vehicle looking clean even when it has been a week since its last wash.

Technical Details

This is a solid finish, which is excellent news for your repair. Unlike metallic paints that can look striped or mottled if the flakes don't lay down perfectly, this solid tan offers a uniform surface that is far more forgiving for a DIY project. You do not have to worry about light reflecting off particles at the wrong angle, which makes blending your repair into the original panels much easier. Just remember that while the color itself is flat, you will need a clear coat over it to replicate the factory gloss and shield the pigment from grease and grime.

Best Practices

On a heavy-duty truck like yours, the paint information sticker is usually tucked away in the glove box or on the cab wall behind the seats. Before you spray or dab Chevrolet Tan (check for code WA8265), you need to shake it for 60 seconds. Solid pigments are heavy and settle at the bottom of the container, so thorough mixing is the only way to ensure the color comes out right. Test the color on the included card to verify the match before you touch the vehicle. When you are ready, keep the container moving to prevent puddles and allow plenty of drying time between thin layers. Working in a shaded area or a ventilated garage will help the paint level out properly.